The Ultimate Assembly - Hydrotech's open joint architectural paver assembly, with a single-source warranty..

Ideal for roof terraces, vegetated roofs and plazas, The Ultimate Assembly begins at the substrate with Hydrotech's premier waterproofing membrane, Monolithic Membrane 6125, and carries through to the overburden of the architectural pavers. Hydrotech's architectural pavers offer high compressive strength, low moisture absorption, and a wide variety of colors and textures.
Benefits

Unlike sand or mortar setting bed installations, the architectural pavers are installed in an open joint assembly, supported at the four corners on spacer tabs or pedestals. Pavers resting on pedestals or tabs can convert sloped decks to dead level usable roof areas. This method of installation provides many distinct advantages...

* Open Joint System - open joints facilitate the flow of water below the paver surface to concealed drains, while also eliminating ponding water and trapped moisture.

* Access to Substructure - drains and all assembly components are easily accessible. If the need should arise, pavers can simply be lifted and reset in place so maintenance and future alterations are easily accomplished.

* Installation Flexibility - pavers are set directly on spacer tabs or adjustable pedestals to an established grade and even leveled where a sloped deck exists, a simple, durable solution.


Note: Hydroflex 10 is a specially formulated rubberized asphalt separation/protection sheet with synthetic fiber reinforcement. Hydroflex 10 also acts as the separation sheet between the insulation and roofing membrane in an PMR roof configuration. Hydroflex 10 is not designed to provide protection from vehicular construction traffic or extreme physical abuse. Additional protection must be provided in high traffic areas or where extreme physical abuse is anticipated.

For more information, please visit http://www.hydrotechusa.com/assemblies/roofing